Type: Flexo Plate Mounting Tape
Paper core: 76 mm (3 inch)
Thickness: 0,38 mm (20 mil)
Foam hardness: Soft
Adhesion to plate: High
Adhesion to sleeve: High
- Dimensions of Small Roll ( W / L ): 457 mm x 6 m
Dimensions of Regular Roll( W / L ) : 457 mm x 25 m
Dimensions of Log Roll ( W / L ): 1370 x 25 m
Box Size of Regular Roll ( L / W / H ): 50 x 19 x 19 (in cm)
Box Size of Log Roll ( L / W / H ): 140 x 24 x 24 (in cm)
- Net Weight of Small Roll: 1.0 Kg
- Gross Weight of Small Roll: 1.5 Kg
Net Weight for of Regular Roll: 3.8 Kg
Gross Weight of Regular Roll: 4.3 Kg
Net Weight of Log Roll: 11.5 kg
Gross Weight of Log Roll: 12.5 kg
5 levels of foam hardness available
This product hardness on the scale:
INNOVA 40H PLATE MOUNTING TAPE
The INNOVA 40H Flexographic Plate Mounting Tape is a high adhesive and soft version for label printing ensuring ideal printing results even for complex and long print runs. This Plate Mounting Tape has a thickness of 0.38mm.
The small roll size of 6 m length is a sample roll. You can buy this when ordering first time to try our products.
The full log roll of gives the customer the option to cut into any required size. We can do this for you on request with no extra cost.
Adhesion properties for INNOVA 40H
It is the right choice for all printing cylinders. Because it will hold the plates down and enables plate and tape removal at the same time. Especially if you are using a thin printing plate like 1.14mm.
Printing properties for INNOVA 40H
The choice of the appropriate hardness depends primarily on the ink coverage of the printing plate. Fine lines and ink coverage up to 20% require a soft Plate Mounting Tape like INNOVA 40H, but for anything above 20%, We recommended using INNOVA 41H. INNOVA 40H is one level softer than the INNOVA 41H. However, we also suggest taking a look at the printing plate type. Hard printing plates may require a soft tape, While other factors are the substrate and ink viscosity. On uncoated paper, for example, soft tapes will provide the best results. But with most label stock filmic materials, it is safer to go with a medium hardness like INNOVA 41H. As you know, Flexo Printing has few standards; we recommend a fingerprint test. A fingerprint test is the most scientific way to get to the right combination. INNOVA engineers will be happy to advise you on the right product for the process.
General recommendations for INNOVA 40H Mounting Tape.
Processing our tapes is very simple, but it always works best on cleaned surfaces. For safe use without lifting the plate edges, try using masking tape on the plate edges. Download our "How to use" guide here.
Find more info: www.innovaflexo.com